|J's after my 1st attempt...A bit more rooster than mouse.|
|J's the 2nd time around. Still a bit off, but much more mouse-like!|
In all my months of planning for our family trip to Disney, I have come across many diy projects. Some more realistic and adorable than others. I guess I got caught up in the magic of Disney, because the appeal of the tie-dye mickey shirt was more than I could take! I am also not a matchy-matchy person, yet I have made myself, J, and A Mickey head tie-dye shirts for the plane ride. (Disney Kool-Aide drinkers raise their hands!)
So if you have seen my pics on FB, or Instagram, or Pinterest, well here is a tutorial.
1st-- Rather than use a kit, go ahead and just get regular fabric dyes. I used Tulip brand this time around, and found the colors more vibrant than Rit. (Thanks to my lovely friend Cie for the advice out the gate!)I purchased purple, pink, aqua, and green. I also purchased four large squeeze bottles. I snagged these items plus my shirts (and A's dress) from Hobby Lobby.
2nd--Wash your shirts. No fabric softener!
3rd--Find your template. I did a google search, found one I liked, then stretched it to a size I liked. Print it out, cut it out.
5th--This is where I got a bit turned off this process. Take waxed floss and stitch around the Mickey head.
6th--After you have stitched the entire mouse head and have tied the thread off, the basic shape should remain, but it will be much smaller. Wrap this, just below the stitches, with two rubber bands.
7th-- Dampen the entire shirt, including the rubber-banded portion. (If you used purple pen to outline your mouse head, and it bleeds when you wet the shirt, don't panic. It won't matter after you dump a liter of dye on it.)
8th--Now comes what I deem "the tricky part." Most tutorials I found all had perfectly rolled and twisted danish-like shirts. As you can see, I am not one of those perfect people. However, my lumpy, bumpy, dumpy rolled shirt still turned out cute. So roll your shirt as best you can. Make sure you keep the Mickey head out, I used it as a sort of handle.
9th--Criss-cross your rubber bands. I used three rubber bands in addition to the two around the Mickey head (so five total Math peeps!). I wrapped one around the entire rolled shirt. Then I made a pizza-like pattern with the remaining two bands.
11th--Start coloring in your pizza pattern. I didn't want to end up with brown from uncomplimentary colors mixing, so I tried to keep the colors lined up with that in mind. You feel free to do what you like though!
|Please ignore my grody pan. There is a reason it is being used to tie-dye on, not cook on.|
12th--Bake these suckers at 275 for 20-30 minutes.
|You can see where my previous shirt baking attempts were placed.|
14th--After the shirts are done baking, rinse them until the water runs clear. Do not twist or wring the shirt until the water is clear. This (sort of) helps the white part stay white.
15th--Remove the floss!
16th--(Optional.) Lay the shirt out with a piece of cardboard between the front and back layers. Take your homemade bleach pen and outline/trace where the stitches were. Let the bleach sit for as long as desired. If your mix is a good ratio, you will see instant lift in the color. When it has set for as long as you want, carefully rinse the bleach.
17th--Wash the shirts! Dry the shirts! Enjoy the shirts!! WHEW. If you made it all the way to this point, hurray. I promise, this is a lot of steps, but it is fun.
|A's finished dress. (Bows need to be stitched.)|